Spiral paper tube machine correct operation method

Spiral paper tube machine correct operation method

No matter what equipment safety is a problem of many customer relationships, you only need to follow the operation process of the spiral paper tube machine when running the equipment to avoid accidents. Can you know how to operate the spiral paper tube machine correctly? If you don't know, it's best to know this to make you more secure. Let me introduce you how to operate the spiral paper tube machine:

First, the operation method

1, inspection work

If you look at each part of the equipment while you are running the spiral paper tube machine and confirm that it is in good condition, it must be repaired immediately, and irreparable conditions such as whether the screw paper machine line is normal or not are tightened and At each point, add some oil and some lubricant to the fueling point to make it easier to use the spiral paper tube machine.

2, mechanical equipment

This spiral paper tube machine must be considered for the use of the daily maintenance. If you are not free to use the staff for free use, there may be some internal problems that may cause problems in the spiral paper tube machine you manage. Not safe.

3. The edging of the spiral paper tube machine must prevent the trousers and the like of the personnel from being caught in the low shaft of the spiral paper tube machine and the part of the hanging paper should be prevented from being on the independent paper holder and can be hung on each paper shelf. Multiple paper rolls can also be determined according to the number of layers of paper required by the customer's special requirements.

4. When the spiral paper tube machine is transferred, it can be automatically glued and the thickness of the glue can be scraped off and can be adjusted at will and the temperature generated by the electric heating you use can be adjusted.

5. The general part of the transmission part of the spiral paper tube machine is driven by a high-power AC motor and can be used with the inverter to control the motor and the part of the transmission is cut on the machine. The machine has a pneumatic type and so on, which can provide many customers with choices.