Industry Knowledge

Paper tube machine staff safety rules

Publish Time: Author: Site Editor Visit: 440

Paper tube machine staff safety rules

1. Properly wear personal protective equipment. The wear must be worn, and the wearer must not wear it. For example, during the mechanical processing of paper tubes, female workers are requested to wear protective caps, and if they are not, they may twist their hair into them. At the same time, it is requested not to wear gloves. If it is worn, the rotating part of the paper tube machine may twist the gloves in and hurt the hands.

2. During the operation of paper tube machinery and equipment, the safety inspection should be stopped according to the rules. In particular, the paper tube machine is to see whether the tightened objects can be loosened due to vibration so as to re-tighten.

3. Before the operation, stop the safety inspection of the paper tube machinery and equipment, and run it empty, and confirm that it is normal before it can be put into operation.

4. The equipment is strictly forbidden to run with faults, and it must not be used together to prevent accidents.

5. When the paper tube machinery and equipment are in operation, it is strictly forbidden to adjust by hand; it is also not allowed to measure parts by hand, or stop smoothing, cleaning debris, etc. If it is necessary to stop, the mechanical equipment should be shut down first.

6. The cutters, jigs, and processed parts used in paper tube machinery and equipment must be firmly installed and not loose.

7. The safe installation of machinery must be used correctly according to the rules, and it must not be disassembled and not used.

8. When the paper tube mechanical equipment is in operation, the operator shall not separate the work positions to prevent unattended handling when problems occur.

9. After the work is completed, the switch should be turned off, the cutter and the workpiece should be withdrawn from the working position, and the work site should be settled, the parts, jigs, etc. should be placed uniformly, and the paper tube mechanical equipment should be cleaned.

24v dc motor gearbox motor dc gear motor micro brushless motor